Posted by: Peter Andrease

Posted on: September 4, 2012 1:26 pm

-

In this tutorial we’ll be using two resource files. You can download them for free at these two links:

Road
Sky

1) Open up the mountain image in photoshop and add a selection to the mountains in the background. I used the quick selection tool and a radius of 30px. You might want to use the pen tool or the polygonal if you want a finer selection.

Create a selection

2) Create a new layer and add a mask to it.

mask

3) Open up the sky image and add it to the landscape file. Clip it to the mask selection and resize it so it fits nicely into the background.

merge the layers

4) Use the patch tool to get rid of the car, I had to use a brush to get rid off a slight blur the patch tool created.

patch out the car

5) Add a color balance adjustment to the landscape using the below.

Add a a color adjustment

6) You should be left with the final image.

Final Image

Posted by: Peter Andrease

Posted on: August 28, 2012 2:33 pm

-

Let’s finish off last week’s tutorial with part 2. If you missed it click here to see part one.

We’re going to add two buttons either side and some text in the middle. The main part of understanding in this is adding layer styles, they may seem complex but the best way to learn is by playing around with them yourself.

Final

1) Open up the psd we were working on from last week. Add create a new layer. Grab the ellipsis tool and draw a circle that fits in the bottom part of the radio like the below. Fill it with colour: #707070.

First step

2) Now add the following layer styles.

Styles1

3) Duplicate the layer, reduce the fill and add the following styles:

Styles 2

Styles 3

Styles 4

Styles 5

Styles 6

4) After adding all the styles you should now have something like the below:

Second step

5) Duplicate the layer and move it slightly up then move it to the other side.

6) Add in the text “Volume” and “Tuning” underneath the controls. Also I’ve added a vague floral pattern to the face plate. I added it as white and took the opacity down to 30% so it was only just visible. Finally I added in the some text in a nice script in the middle and that’s it! Here’s the complete version below – good luck!

Final

Posted by: Peter Andrease

Posted on: August 21, 2012 12:41 pm

-

This week let’s create an fm tuner in photoshop from scratch. This tutorial shouldn’t take more than an hour and is probably aimed at the intermediate user. I’ll be using brushes, shapes and blends so if you need practice in any of these read on!

step four

1) Start by opening a new document in photoshop. I chose the size 1000 x 379 px. I filled it with a nice black background that sort of resembles a car dashboard from subtlepatterns.com.

2) Next draw a rectangle inside this leaving around 50px padding between the canvas and the rectangle all the way round. Fill it with a nice pattern, mine came from subtlepatterns.com again. Next add a #181818 stroke of 8px. Next draw a rectangle a little bit higher than half the height of the main rectangle and fill with #6f6f6f.

step-one

3) Next control click on the mask for the smaller rectangle and add a new layer. Choose a soft brush and create a shadow around the edge of the rectangle to give it some depth.

4) Lets add a white stroke to the bottom of the tuner to give it even more depth. Duplicate the rectangle then lower the fill to 0%. First add a stroke of 3px inside and color #ffffff and then rasterize the layer so we can delete some of the line. Grab the eraser and drop the opacity to about 30-40% making sure the hardness is 0% proceed to erase the whole of the top line and fade the side lines. Lower the opacity to about 50%. After that you’re done with the background for the moment so group it up and lets move on.

step two

5) Next let’s create the lines for the tuner. Add 3 2px lines of the same length and same spacing on the right of the tuner. Then add a rectangle of 80px high at the bottom spanning the whole width of the tuner, this is going to be used in the next part of the tutorial for the knobs.. Make the smaller lines #898989 and the rectangle. Add in all the numbers and “FM Stereo”, I used Helvetica Neue, try a nice sans-serif font to gain the same style

step three

6) Lets then create the red button on the left of the tuner. Create a new layer and using the ellipsis tool draw a small circle. Fill it with red and the give it a stroke of 5px # 7d7d7d outside. Next add bevel and emboss. Choose Inner Bevel, smooth, depth 1000%, direction down, size 6px, soften 5px, angle -90 degress. Highlight opacity 87% and shadow opacity 15%. Add a grainy pattern overlay and reduce the opacity to make it slightly duller.

7) Create a 2px blue line to use for the tune location and place it somewhere nice and balanced.

step four

8 ) Let’s give some gloss to the face of the tuner and then we’re done on that part. Using the pen tool draw a curvy line to opposite corners of the tuner. Make the selection and then using a soft white brush colour the selection from the center. This will give the illusion of a reflection.

step four

9) Save it and then come back next week to see part two where we’ll be adding the knobs to the bottom of the tuner.

Posted by: Peter Andrease

Posted on: August 15, 2012 9:02 am

-

In this tutorial we’re going to create a red ball from scratch adding light and shadows to give it the illusion of being 3d. This is a basic tutorial helping you get to know a few tools in photoshop a bit better and learning how shadows and light are the most important thing in creating a realistic drawing in anything.

final

1) First of all draw a perfect circle using the eliipsis tool, give yourself enough room on the canvas for the shadow we’re going to be adding in a minute.

first

2) Add a gradient overlay style to the circle we just created. I kept the blend mode normal changed the opacity to 34% and the gradient from white to transparent. Change the style to radial and the angle to 90 degrees. Next change the scale to 75% and you’ve created the illusion of a light shining directly down onto the ball.

second

3)  Next lets add some shadow underneath the ball so it looks like its sitting on something. Create a new layer underneath the ball. Draw an oval the same width of the ball and a third of the height. Fill it with black and choose Gaussian blur. For radius slide it up to about 18 pixels and you should have a shadow forming. Play around with the opacity until it looks the right sort of shade, mine was about 34%. Duplicate the layer and transform it to about half the size so it’s darker near the base of the ball.

third

4) Next lets create the shadow at the bottom of the ball, this will give it depth and realism. Add a new layer above the circle and creat a clipping mask. Grab a soft brush with black selected and change the opacity down to about 30%. Carefully stroke along the bottom of the ball making it darker near the bottom gradually getting lighter further up the ball.

forth

5) There you have it a realistic looking ball created in under 15 minutes!

Posted by: Peter Andrease

Posted on: August 7, 2012 3:18 pm

-

First open up you image in Photoshop. I’ve chosen the below image and I’m going to focus on changing the colors in the tie and shirt.

first

Once the picture is open pick the select tool that favours it the best. I’ve chosen the Polygonal Lasso Tool as it’s going to be the quickest and easiest in my opinion. Here’s the selection below.

second

Next create a new layer in the layers panel. Open up the adjustments panel if you haven’t already and click on Hue/Saturation. Once clicked on the selection will be immediately turned into a layer and ready to work on.

To change the colors move the hue slider first to change the colours. The great thing about it is the two colors in the tie will keep their color balance and the image should keep it’s balance. The further you move the slider the further along the color spectrum you go so you may need to either increase or decrease the saturation underneath. Play around till you get the colors you were looking for. Here’s what I came up with below.

third

You can always revert back to the original image by deleting or hiding the layer.

In this one I’ve changed the color of his shirt too. By using the color selection tool and raising the fuzziness I managed to select most of the blue before adding the hue.

forth

 

Posted by: Peter Andrease

Posted on: July 31, 2012 3:25 pm

-

Photoshop is a program that can take a lifetime to learn. You’ll be doing one way for years and then may discover there’s actually a quicker way or more cleaner way do it. I’m going to go through a few keyboard shortcuts and some ways I like to work in such a great program.

The color range tool

So we all know the different types of selection tools:

  • Marquee
  • Lasso
  • Polygonal Lasso
  • Magnetic Lasso
  • Quick Selection and magic wand
  • Pen tool

You might not have heard of the Color range tool but it’s a good one to know in the right situation. Find it on the menu ‘Select’. Block colours that are scattered around an image can be quickly selected with the click of the button – rather than having to go around the image and click on each instance of the colour.

 

Some useful Photoshop Windows Keyboard Shortcuts

 

  • Transform: Ctrl + T
  • Hue/Saturation: Ctrl + U
  • New layer: Ctrl + Shift + N
  • Duplicate Layer: Ctrl  + J
  • Save: Ctrl + S
  • Copy all layers in a selection: Ctrl + Shift + A
  • Preferences: Ctrl + K
  • Change Document: Ctrl + Tab
  • Fill layer with background colour: Alt + Del

Posted by: Peter Andrease

Posted on: June 26, 2012 10:42 am

-

Vintage effects on photos can give a photo a total different look and bring out something else. Try completing these steps and then maybe adding it as an action in your photoshop. Then you can try it on multiple photos to see what it comes out like.

  • Create a duplicate of the image, this is so you can refer back to it at any time if you need to.
  • Create a new layer and add a gradient fill to it. Choose black to white with blend mode “Soft Light.” Make the style Radial and the angle 120 degrees. Make sure the scale is 125%.
  • Next create a new layer and add a gradient map, this is done using the adjustments panel. Choose black to white.
  • Finally add a curves adjustment like the one below, you should be left with the right result. You can always change the curves slightly to change the desired effect.

Adjustment curves

Posted by: Peter Andrease

Posted on: June 19, 2012 11:07 am

-

before and after lomo effect

Open up the image that you want to create the effect with – I’ve used a portrait in this case.

Duplicate the layer so you’ve got the original, you can always look at how it first looked that way.

I wanted to blur everything around the face so I roughly used the ellipsis tool to outline her head. I inverted the selection and then added a 5px Gaussian blur.

Now to add a curves adjustment layer, use all red, green and blue channels like the image below.

adjustments

Finally I added a diagonal gradient from black to white from the left top corner to the bottom right, I changed the blending mode to Soft Light and the scale to 125%.

Posted by: Peter Andrease

Posted on: June 13, 2012 8:14 am

-
  1. Open up photoshop. The latest edition is CS6 but most of the points in this tutorial will work back to CS4. When picking your document size I usually design in 960px width, so I’ll usually create it at 960 setup guides for the edges of the page and then add extra padding to either side, maybe an extra 100px each side.
  2. Set up your guides if you haven’t already. There’s an action I like that creates a 960 grid in multiples of 12, 16 and 24. You can find it here. It does help speed up the whole process.
  3. Now you’ve got your canvas, you’re ready to start designing. Hopefully you’ve got some idea of what you or the client wants. It’s a good to have content, branding, images and a spec before you start. I usually sketch out a wireframe of the site I’m going to design first and refer back to it while I’m working in photoshop. Pencil and paper is much faster for jotting down new ideas and designs so it’s good to have one to hand.
  4. I’ve got into the habit of picking my fonts first and I think it’s good to be in that habit. As you’re designing for the web you need to make sure you’re using web safe fonts, check my article here. There’s some great alternatives to Arial and Georgia so don’t feel like you’re stuck with these.
  5. Next I’ll probably pick my colour pallete. My favourite place for this is kuler. Its simply brilliant for colour matching. If you’ve got a colour already then kuler will match it or if you’re looking for a new colour pallete then there’s literally thousands to choose from.

Posted by: Peter Andrease

Posted on: May 18, 2012 9:23 am

-

This tutorial will show you the best way to add a simple gradient backgound to your website using photoshop and css.

Open a blank document in photoshop at the height you want the gradient to be and add a new layer, then fill with any colour using the ‘Paint Bucket Tool’. Now double click the layer to bring up the Layer Style options and select Gradient Overlay, create the gradient you wish, for example:

-

This gradient uses the colours #075068 at the bottom to #0f7da1 at the top. Make sure to keep a note of the bottom colour (i.e. #075068) as this will be used in the css to blend into the rest of the background.

Now go to Layer > Flatten Image, then go to Image > Canvas Size and make the width 1px, hit Ok and then hit Proceed. Now save this image for web, a .png file is probably the ideal file format for quality and file size.

With your image created all you need to do now is simply add the following script to your css:

.background {
background: #075068 url(images/background-image.png) repeat-x;
}

Then simply change the colour hex code to your code and rename the image name/location to yours, you can now add that class to any html element to have your repeated gradient, like that shown below:

Authors
Categories
Archives
Blogroll